A Lehigh Hanson Company

Cadman Ready-mix

 

Ready-Mix Concrete

 

Cadman has supplied ready-mix concrete for over 80 years in the greater Puget Sound Region. From residential patios to commercial high-rises, Cadman has the tools and expertise to help meet your concrete needs.

 

  • Pervious Concrete
  • Water Repellent and Waterproof
  • LEED Specified
  • Placement Energy Consolidate Concrete
  • Decorative Concrete
  • High Strength Mixes
  • High Early Strength
  • SOG Designs
  • Fiber Reinforced
  • Lightweight
  • Control Density Fill
  • Exposed Aggregates

  • Broom Finish
  • Insulated Concrete Forms
  • And much more

CALCULATE YOUR NEXT PROJECT!

 

Ready Mix Calculator

cube cylinder

Note: All results are estimates only. Not responsible for any discrepancies in material based on calculations made with this app.

RESULTS

Download PDF Icon

Download a PDF of your calculations

Quantity – Measurements are not always precise, especially with large areas that are not machine graded. We recommend ordering a little extra, because coming up short can be costly (small load charges, labor wait times, etc.). A common rule of thumb is to add 4% to 10% to your calculation to account for waste, spillage, over excavation, settlement, spreading of forms, loss of entrained air or other changes in volume. Concrete can be ordered in ½ yard increments.

Strength – Most concrete is ordered with a performance compressive strength at a 28-day measure of a hardened concrete cylinder. We have information on our website for typical application specifications and proper testing procedures. Any slab exposed to freeze-thaw conditions should be a minimum of 4,000 psi with air entrainment.

Slump – Slump is a measure of the consistency or workability of the concrete. Typically, orders and mixture designs are for a 4-inch slump (the measure of the distance a wet concrete cone will fall). It is always best to adjust slump at the plant.

Other Supplies – Do you need aggregates (fill sand, stone or gravel) for the project? If so, check out our aggregates LOCATIONS to supply your needs.

Quantity – Measurements are not always precise, especially with large areas that are not machine graded. We recommend ordering a little extra, because coming up short can be costly (small load charges, labor wait times, etc.). A rule of thumb is to add 4% to 10% to your calculation to account changes in volume. Concrete can be ordered in ½ yard increments.

Strength – Most concrete is ordered with a performance compressive strength at a 28-day measure of a hardened concrete cylinder. We have information on our website for typical application specifications and proper testing procedures. Any slab exposed to freeze-thaw conditions should be a minimum of 4,000 psi with air entrainment.

Slump – Slump is a measure of the consistency or workability of the concrete. Typically, orders and mixture designs are for a 4-inch slump (the measure of the distance a wet concrete cone will fall). It is always best to adjust slump at the plant.

Other Supplies – Do you need aggregates (fill sand, stone or gravel) for the project? If so, check out our aggregates LOCATIONS to supply your needs.

ColorMix™ Color Chart

ColorMix ™ Custom Mix

Cadman Lab Systems™ is our line of "branded" concrete mixes. They are custom, all inclusive mixes, each of which is designed for a specific purpose. These mixes are designed for easier placement, pumpability, and cost savings.

A superior integral concrete coloring system that provides the following benefits:

  • Concrete mix specifically designed for color consistency load to load.
  • Incorporates Fly Ash which improves workability and reduces efflorescence (whitening) and water demand.
  • Low water/cement ratio which means reduction in shrinkage and cracking.
  • Designed at a 5" +/- 1" slump to improve workability.
  • Available in 3/8" pea gravel for maximum ease in placing and pumping.
  • Twenty popular Northwest colors available locally.
  • State of the art liquid color metering system ensures consistency for weighting, blending and conveying colors into a ready mix truck.
  • Improves freeze/thaw resistance, strength and durability.

Cadman's intergrated ColorMix™ enhances the beauty of your project and increases property value. Our ColorMix™ combines contemporary looks with timeless style. The twenty color mixes offered were selected by historical tracking of the most popular colors sold in the Northwest.

ColorMix™ is integrated throughout the pour so it will not fade. In addition, ColorMix™ combined with Architectural Concrete allowes a choice of stamped and textured finishes that create unique and attractive options for you. ColorMix™ can also be enhanced with matching color curing sealants.

 

DrainX

DrainX ™ Custom Mix

Cadman Lab Systems™ is our line of "branded" concrete mixes. They are custom, all inclusive mixes, each of which is designed for a specific purpose. These mixes are designed for easier placement, pumpability, and cost savings.

When It's raining... it's draining!

Storm Water Management
DrainX™ helps maximize your land use, as it can eliminate the need for a detention vault as well as providing a driving surface.

Low Impact Development (LID)
DrainX™ naturally recharges the ground water table and conserves water while protecting our streams.

Available in Two Great Mix Designs:
DrainX G - Designed with 1/4" gravel
DrainX P - Designed with 3/8" gravel

DrainX™ can be stained or colored to enhance it's overall appearance.

 

DOWNLOAD BROCHURE

 

performX

PerformX ™ Custom Mix

Cadman Lab Systems™ is our line of "branded" concrete mixes. They are custom, all inclusive mixes, each of which is designed for a specific purpose. These mixes are designed for easier placement, pumpability, and cost savings.

Concrete that performs for you!

Performance energy consolidated concrete requires no vibrating and can flow over 100 feet. This highly improves productivity on large flatwork and wall applications. PerformX™ and PerformX Slab™ are the next generation of concrete.

  • PerformX™ and PerformX Slab™ offers two day strengths over 4000 psi which means early form removal.
  • Achieve ultimate strenghts over 8000 psi.
  • Flowability is a solution for filling voids and narrow framework or congested reinforcement.

 

DOWNLOAD BROCHURE

 

permawall

PermaWall ™ Custom Mix

Cadman Lab Systems™ is our line of "branded" concrete mixes. They are custom, all inclusive mixes, each of which is designed for a specific purpose. These mixes are designed for easier placement, pumpability, and cost savings.

It's what you don't see that counts!

Cadman's PermaWall™ is a proprietary concrete mix developed by Cadman and designed specifically for use with your Insulating Concrete Form construction projects.

  • Contains special admixtures that make the concrete self-compacting which eliminates the need for vibration, while ensuring no voids within your completed wall.
  • Low water contents with very high workability means reduction in shrinkage and improved bond to reinforcing steel.
  • Mix designed to reach 850 psi in one day and over 2000 psi in 7 days which means bracing may be stripped in as little as 24 hours.
  • Designed with 3/8" aggregate to aid in placing and self-consolidation.
  • Contains almost 40% fly ash for an environmentally friendly mix to use in your "green" project.
  • Ensures a smooth, flowable mix, designed specifically for use in ICF walls where there are obstacles of plastic webbing and reinforcing steel.

 

 

ProwFlow

Pro-Flow ™ Custom Mix

Cadman Lab Systems™ is our line of "branded" concrete mixes. They are custom, all inclusive mixes, each of which is designed for a specific purpose. These mixes are designed for easier placement, pumpability, and cost savings.

Go with the flow!

Cadman's Pro-Flow™ is a controlled density fill for backfill projects.

  • Pro-Flow™ is a series of 6 specialty mixes designed to replace conventional compacted back-fill.
  • Fast set times, even in cool, wet soil conditions, means more efficient.
  • Designed to reduce labor costs. No compaction required (except for Dry-Pack).
  • Remains excavatable for the life of the project.
  • Excellent stability for even tough pumping demands. Designed to be flowable, cohesive and non-bleeding.
  • Flowability allows for ease of placement and compaction in areas where standard back-fills simply cannot be used (i.e., pipes, cables, etc.)

 

Repelex

Repelex ™ Custom Mix

Cadman Lab Systems™ is our line of "branded" concrete mixes. They are custom, all inclusive mixes, each of which is designed for a specific purpose. These mixes are designed for easier placement, pumpability, and cost savings.

The complete integral concrete waterproofing system!

Repelex™ is designed to provide permanent waterproofing with minimal long term maintenance costs. You can reduce your weather delays since integral water-proofing is less sensitive to rain than membrane installation. Repelex™ with Hycrete is designed to minimize shrinkage. Proportioned for easy pumping with a 6" +/- 1" slump, Repelex™ with Hycrete exceeds post tension requirements by reaching early 3 day strengths.

Repelex™ with Hycrete = DURABILITY with these key factors:

  • Strength
  • Shrinkage
  • Absorption
  • Moisture Vapor Emission
  • Water Permeability
  • Constructability

 DOWNLOAD BROCHURE



X