A Lehigh Hanson Company

 

< Back to Pipe Products

Boxes

Inland produces a range of precast box culverts that can be used for a variety of horizontal and vertical applications. Primarily intended for use as a horizontal conduit where headroom is limited, precast boxes can significantly cut the costs by reducing or eliminating formwork, dewatering, traffic control and curing when compared to cast-in-place concrete.

Precast boxes can be designed for various depths and loading conditions including truck, railway and airplane loads. Similar to concrete pipe, precast box culverts are available in unique configurations including miter bends, wyes, cast-in baffles, and manhole access openings.

Boxes

Precast Box Applications

  • Storm sewer systems
  • Underground storage tanks
  • Drainage culverts
  • Pedestrian and wildlife crossings
  • Manholes
  • Utility chambers and corridors
  • Small bridges
  • Conveyor tunnels

Inland Manufactures Precast Boxes To Meet The Following Standards:
ASTM C1433 Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers
CSA S6-06 Canadian Highway Bridge Design Code

For information about culverts, view our full catalog of products available in your area.

Precast Box Drawings

Detailed dimensions are provided on drawings for all our Box Culvert products to assist with your design projects.
Please contact us if you require additional information.

Standard:
Standard Vertical Box Manhole

Maximum Pipe Size For Box Sections (1800mm x 900mm To 2400mm x 1800mm)

Maximum Pipe Size for Box Sections (2400mm x 2400mm To 3600mm x 3600mm)


To see the drawings for each size, click the following links:

1800mm X 900mm1800mm X 1200mm2400mm X 1200mm2400mm X 1500mm2400mm X 1800mm
BoxBoxBoxBoxBox
Base/PlugBase/PlugBase/PlugBase/PlugBase/Plug
Slab Top/CapSlab Top/CapSlab Top-CapSlab Top/CapSlab Top/Cap

2400mmX2400mm3000mm X 1500mm3000mm X 2400mm3600mm X 3600mm 
BoxBoxBoxBox 
Base/PlugBase/PlugBase/PlugBase/Plug 
Slab Top/CapSlab Top/CapSlab Top/CapSlab Top/Cap 


Box Bevel Drawings

Detailed dimensions are provided on drawings for all our box culvert products to assist with your design projects.
Please contact us if you require additional information.

Standard bell and spigot box bevels are cut from a 2.5m box length.

Click here to view the box culvert beveled end drawing.
Click here to view the maximum pipe size for box sections 1800mm x 900mm to 2400mm x 1500mm.
Click here to view the maximum pipe size for box sections 2400mm x 2400mm to 3000mm x 2400mm.

1800mm X 900mm1800mm X 1200mm2400mm X 1500mm   
BoxBoxBox   
Base/PlugBase/PlugBase/Plug   
Slab Top/CapSlab Top/CapSlab Top-Cap   


2400mm X 2400mm3000mm X 1500mm3000mm X 2400mm   
BoxBoxBox   
Base/PlugBase/PlugBase/Plug   
Slab Top/CapSlab Top/CapSlab Top/Cap   

 


X